Tilt Tower Kits
72 ft Complete Kit
(riser and 4 anchors included but not shown here) |
2.5" Basic Kit
Features:
|
2.5" Complete Kit
Features:
|
NOTE: The following are NOT included in basic tilt tower kits, unless otherwise specified: structural steel galvanized pipe, guy wire 3/16 galv or stainless steel "Aircraft Cable," thimbles, clamps, turnbuckles or other hardware and concrete for rebar anchors.
Example Tower Schematics
Actual tower height depends on the length of the pipe or tubing being used. Example A: Two 24Ft sections with a 4 Ft Riser will make a 52 ft tower. The riser is the top 4 ft section of 2 inch Schedule 40 or stainless steel pipe that the turbine base mounts onto. Example B: Using 18 foot sections, a 3 section tower the top of the tower would be 54ft plus a 4 ft riser for a hub height of 58 ft. Many other variations can be built. Generally this type of tubing is similar to heavy duty galvanized fencing material that comes in 15, 18 or 21 ft sections. The longest practical tubing length is 24ft. Photos | Videos | Download Manuals & Brochures | Contact |