|
SPECS, PRICING and KITS Available 1 Jun
BASIC 2.5" KIT OPTION 1
Fits standard 2 7/8" OD galvanized structural steel
Use 18ft 21ft or 24ft sections
Bare Kit, tilt base and couplers, 10yr warranty, Note: Guy wire, pipe, clamps, anchors, riser and shipping extra.
25 Foot (Base and Riser) -
47 foot (Base, 1 Coupler and Riser) -
72 foot (Base, 2 Couplers and Riser) -
Electroless Nickel Plate Option no longer available.
2.5" FULL KIT OPTION 2
Fits standard 2 7/8" OD galvanized structural steel tubing.
Full Kit, including tilt base, couplers, anchors, thimbles, clamps, turnbuckles, clevis, eyebolts and stainless guy wire.
Note: Shipping extra
- 25 Foot (includes Base and Riser)
- 47 foot (Base, 1 Coupler and Riser)
- 72 foot (Base, 2 Couplers and Riser)
72ft Complete Kit shown here (riser and 4 anchors incl. not shown)
|
|
Photos of COMPLETE or BASIC Components
Cable Clamps, Thimbles, Anchors and Bolts
NOT INCLUDED IN BASIC KITS unless noted
Structural Steel galvanized pipe
Guy wire 3/16 galv or stainless steel "Aircraft Cable",
Thimbles,
Clamps,
Turnbuckles or
Other hardware and concrete for rebar anchors
Example 47 Ft Tower schematic
Actual tower height
depends on the length of
the pipe or tubing being used. Two 24Ft sections with a 4 Ft Riser will make a 52Ft
tower. The riser is the top 4 Ft section of 2 inch Schedule 40 or
stainless steel
pipe that the turbine base mounts onto. Another example; Using 18 foot sections, a 3 section tower the top of the tower would be 54ft plus a 4 ft riser for a hub height of 58 ft. Many other variations can be built. Generally this type of tubing is similar to heavy duty galvanized fencing material that comes in 15, 18 or 21ft sections. The longest practical tubing length is 24ft.
 |
